Certificates of SyPly plywood produced by Syktyvkar Plywood Mill

Quality documents · Quality management system

from 08.06.23 to 07.06.26

Conclusion No. 756 on the state of measurements in the laboratory

This conclusion certifies that the production laboratory of the quality service of Syktyvkar Plywood Mill LTD has the necessary conditions for performing measurements in the field of activity in accordance with the annex.

Скачать заключение (1,42 Mb) (print)

from 12.05.23 to 11.05.26

Certificate of conformity of the quality system to the standard management systems ISO 9001:2015

Certificate No. TASC-C-20230512001. This is to certify that SYKTYVKAR PLYWOOD MILL (at Ukhtinskoe shosse 66, 167026 Syktyvkar, Komi Republic, Russian Federation) has been found to conform to the Management System Standard - ISO 9001:2015. This Certificate is valid for the following product or service ranges - MANUFACTURING OF PLYWOOD AND CHIPBOARD. Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

from 14.02.23

Quality policy

Скачать (1,11 Mb) (print)

Quality documents · Declaration of performance

from 25.04.24 to 23.04.27

Declaration of conformity of WBP birch plywood

The products of SPM ltd - general purpose birch plywood, grade WBP, emission class E0.5 (serial production) - meets the requirements of regulatory documents GOST 3916.1-2018.

from 27.03.24 to 26.03.27

Declaration of conformity of MR birch plywood

The products of SPM ltd - general purpose birch plywood, grade MR, emission class E0.5 (serial production) - meets the requirements of regulatory documents GOST 3916.1-2018.

Quality documents · CARB

from 14.02.26 to 14.02.28

Certificate of conformity of birch plywood to ULEF CARB (California Air Resources Board) requirements

Birch plywood produced by the Syktyvkar Plywood Mill complies with the requirements of ULEF CARB.

Download in PDF format (0,34 Mb) (print)

Quality documents · The technical requirements and GOST

from 24.02.24 to 23.02.27

Certificate of conformity for birch structural MR plywood

The products of SPM ltd - general purpose birch plywood, grade MR, emission class E0.5 (serial production) - meets the requirements of regulatory documents TS 16.21.12-001-44769167-2020 and GOST 3916.1-2018.

Загрузить PDF (0,20 Mb) (print)

from 21.02.24 to 20.02.27

Certificate of Conformity of laminated plywood brand of Ltd "SPM" the technical requirements and GOST (WBP)

Products of SPM Ltd – faced birch plywood, emission class E0.5 – meets the requirements of regulatory documents TU 16/21/12-002-44769167-2020 and GOST R 53920-2010.

Quality documents · DIN 51130

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Carat 120/120 gr – class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/Ct) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Carat 120/220 gr - class R10 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Diamond 120/120 gr - class R13 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/D) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Diamond 120/220 gr - class R12 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Hexa 120/120 gr - class R12 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/H) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Hexa 120/220 gr - class R12 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Transport 120/120 gr - class R10 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/T) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.02.22

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Transport 120/220 gr - class R10 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood Smart 120 gr - class R11 to the requirements of TS and GOST

The results of measurements of the coefficient of friction (according to DIN 51130) make it possible to evaluate plywood with a mesh surface (F/W) as a necessary building material when installing flooring or other structures in which wear resistance and anti-slip properties are an important criterion.

(0,41 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 220 gr - class R12 to the requirements of TS and GOST

(0,41 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 120 gr - class R13 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

from 04.11.19

Test results according to DIN 51130 on the anti-slip properties of the surface of plywood DBR 125 gr - class R13 to the requirements of TS and GOST

(0,40 Mb) (print)
(2,49 Mb) (print)

Quality documents · Sanitary-epidemiological expert reports

from 12.02.24

Expert opinion of the hygienic safety

The products of SPM ltd comply with the requirements of Chapter 2, Section 6 p. 3.5, section 13 “Unified sanitary-epidemiological and hygienic requirements for products (goods) subject to sanitary-epidemiological supervision (control)”, approved by decision of the Customs Union Commission dated May 28, 2010 No. 299, SanPiN 2.6.1.2523-09 “ Radiation safety standards NRB-99/2009", SP 2.6.1.2612-10 "Basic sanitary rules for ensuring radiation safety (OSPORB-99/2010)"

Quality documents · Fire

from 30.07.21 to 29.07.26

Fire certificate of conformity for birch plywood of advanced moisture-resistance, faced with thermoactive polymer film.

SyPly birch plywood of advanced moisture-resistance, faced with thermoactive polymer film complies with fire safety:
flammability group - G4,
flammability group - B2,
group of smoke-forming ability - D2,
Group toxicity of combustion products - T1.

from 30.07.21 to 29.07.26

Fire certificate for Birch plywood for construction WBP.

SyPly Birch plywood for construction complies with fire safety:
flammability group - G4,
flammability group - B2,
group of smoke-forming ability - D3,
Group toxicity of combustion products - T2.

Quality documents · EPA

from 14.02.26 to 14.02.28

EPA TSCA VI - Certificate for compliance with requirements of the US Environmental Protection Agency (EPA)

Birch Plywood produced by the Syktyvkar plywood factory complies with the requirements of the US EPA (EPA TSCA VI) ULEF

Download in PDF format (0,34 Mb) (print)

Quality documents · CANFER

from 29.12.25 to 29.12.26

Certificate of conformity of birch plywood to CANFER (Canada Formaldehyde Emissions from Composite Wood Products Regulation) requirements

Birch plywood produced by the Syktyvkar plywood factory complies with the requirements of CANFER.

Dowload certificate (0,53 Mb) (print)

Attestation

from 24.03.05 to 15.10.34

CERTIFICATE for SyPly trademark

Based on the Law of the Russian Federation "On Trademarks, Service Marks and Appellations of Origin of Goods", which entered into force on September 23, 1992 (as amended on December 11, 2002), the Federal Service for Intellectual Property, Patents and Trademarks issued a certificate for the trademark "SyPly" to the Company Syktyvkar Plywood Mill ltd.

Certificates

Quality documents · Quality management system

Quality documents · Declaration of performance

Quality documents · CARB

Quality documents · The technical requirements and GOST

Quality documents · DIN 51130

Quality documents · Sanitary-epidemiological expert reports

Quality documents · Fire

Quality documents · EPA

Quality documents · CANFER

Attestation

Cookie agreement on the sites of "SPM" LLC